Auto Wire Harness With 4P Molex White Connector

Product Details


We test every single engine harness we ship pin to pin to ensure full continuity and all proper crimps or splices in between. This of course confirms everything is going in the right place as well as getting the optimal voltage levels throughout. Two individuals visually inspect every single connector pinout separately so you don’t have mis-pinned connectors. We run through every connector and every heat shrink to ensure everything matches the specs you give us and that nothing is left behind un-shrunk or unfinished. Once everything checks out we walk it back to the talented individual who built it for what we call final shrinks. We leave main portions of the harness un-shrunk in case changes have to be made after quality control. From there it’s off to be shipped to you!


What is included? What sensors are eliminated or added?

For this specific engine harness, here is everything that is included as a standard as well as what we eliminate from the harness:


RETAINED

IAT - Intake Air Temperature

CAM-1 - Cam Sensor 1

CAM-2 - Cam Sensor 2

IAC - Idle Air Control Valve

KNK-2 - Knock Sensor 2

STS - Starter Solenoid

GND - Engine Ground

VSS - Vehicle Speed Sensor

RV - Reverse Light Switch

O2 - Oxygen Sensor

SEE SENSOR VARIANT LIST BELOW FOR OPTIONAL FUNCTIONS


ELIMINATED:

EVAP VSV

OIL-LEVEL (Retained on Supra chassis)

Progressive Power Steering (Retained on Supra chassis)


LETS SEE IT!

As we said before, everything matters. Success is in the details. We take great pride in the look and fitment of our products. The ECU and Chassis section (inside the car) is very thought out and perfectly organized, even when most cannot see this detail. Each adhesive heat shrink is the perfect measurement, the same length and overlap throughout. And lastly, on our CA2 and CA3 harnesses we’ll work with you directly to find the perfect engine to firewall mounting length.


Over the last 10 years, we have developed a comprehensive product line utilizing advanced automated production equipment, and the utmost strict professional testing standards. 


Instant Response: For any question about our product, please email us, we’ll give you reply within 24 hours. 


1(001).png


2(001).png


3.jpg


4(001).jpg


With a group of professional and experienced engineer team working for you and one of the most famous auto wire harness with 4p molex white connector brands, KINKONG is one of the leading such manufacturers and suppliers in China. Welcome to wholesale customized auto wire harness with 4p molex white connector made in China in stock with our factory. And free sample is also available.
Feedback