Automotive Wire Harness Cable Assembly With 8P Molex Connector

Product Details

How is it made? How is our quality control done? Do you test your harnesses?

Great care is given to every detail we pour into these products. Extremely talented individuals build these one at a time to suit the specs you give us. The end result is a perfect fitting wiring harness with an artful high quality component design that is admired by car enthusiasts around the world. These harnesses altogether take 8 hours to 26 hours to make each depending on the version and application.


We test every single engine harness we ship pin to pin to ensure full continuity and all proper crimps or splices in between. This of course confirms everything is going in the right place as well as getting the optimal voltage levels throughout. Two individuals visually inspect every single connector pinout separately so you don’t have mis-pinned connectors. We run through every connector and every heat shrink to ensure everything matches the specs you give us and that nothing is left behind un-shrunk or unfinished. Once everything checks out we walk it back to the talented individual who built it for what we call final shrinks. We leave main portions of the harness un-shrunk in case changes have to be made after quality control. From there it’s off to be shipped to you!


What is included? What sensors are eliminated or added?

For this specific engine harness, here is everything that is included as a standard as well as what we eliminate from the harness:


RETAINED

ALT – Alternator

CRANK - Crank Sensor

KNK-1 - Knock Sensor 1

OIL-P - Oil Pressure Light

A/C - AC Compressor

INJ - Injectors 1 thru 6

COIL - Coil Packs 1 thru 6

TPS - Throttle Position Sensor

STS - Starter Solenoid

GND - Engine Ground

VSS - Vehicle Speed Sensor

RV - Reverse Light Switch

O2 - Oxygen Sensor

SEE SENSOR VARIANT LIST BELOW FOR OPTIONAL FUNCTIONS


ELIMINATED:

EVAP VSV

OIL-LEVEL (Retained on Supra chassis)

Progressive Power Steering (Retained on Supra chassis)

O2-2

TRAC ECU (Supra)


We are an intelligent company, We have OA system, ERP system, PLM system…… , that can help us to management, control quality efficiently…

We accept small order as well. Custom make & OEM special connector according to detail requirement. 

1(001).png


2(001).png


3.jpg


4(001).jpg


With a group of professional and experienced engineer team working for you and one of the most famous automotive wire harness cable assembly with 8p molex connector brands, KINKONG is one of the leading such manufacturers and suppliers in China. Welcome to wholesale customized automotive wire harness cable assembly with 8p molex connector made in China in stock with our factory. And free sample is also available.
Feedback