Automotive Wire Harness For Accelerator Throttle Pedal

Product Details

How is it made? How is our quality control done? Do you test your harnesses?

We test every single engine harness we ship pin to pin to ensure full continuity and all proper crimps or splices in between. This of course confirms everything is going in the right place as well as getting the optimal voltage levels throughout. Two individuals visually inspect every single connector pinout separately so you don’t have mis-pinned connectors. We run through every connector and every heat shrink to ensure everything matches the specs you give us and that nothing is left behind un-shrunk or unfinished. Once everything checks out we walk it back to the talented individual who built it for what we call final shrinks. We leave main portions of the harness un-shrunk in case changes have to be made after quality control. From there it’s off to be shipped to you!


What is included? What sensors are eliminated or added?

For this specific engine harness, here is everything that is included as a standard as well as what we eliminate from the harness:


RETAINED

ALT – Alternator

CRANK - Crank Sensor

MAF - Mass Air Flow (only on USDM 2JZ-GTE and JDM VVTi engines)

H20-T - Coolant Temp for Gauge

ECT - Engine Coolant Temp for ECU

KNK-1 - Knock Sensor 1

OIL-P - Oil Pressure Light

A/C - AC Compressor

INJ - Injectors 1 thru 6

COIL - Coil Packs 1 thru 6

GND - Engine Ground

VSS - Vehicle Speed Sensor

RV - Reverse Light Switch

O2 - Oxygen Sensor

SEE SENSOR VARIANT LIST BELOW FOR OPTIONAL FUNCTIONS


LETS SEE IT!

As we said before, everything matters. Success is in the details. We take great pride in the look and fitment of our products. You won’t see anything on our products that doesn’t make sense and isn’t planned. If installed properly on the engine, you will get a perfect tailored fit. The ECU and Chassis section (inside the car) is very thought out and perfectly organized, even when most cannot see this detail. Each adhesive heat shrink is the perfect measurement, the same length and overlap throughout. And lastly, on our CA2 and CA3 harnesses we’ll work with you directly to find the perfect engine to firewall mounting length.


Furthermore, our humanized design around user experience. 

We ever design & OEM for Sumitomo, Yazaki, Tyco etc. 3D Rapid Prototyping. 

Independent R & D capability for the complicated ECU. 

We use imported qualified material, precised technology, advanced plating treatment while producing terminals. 

1(001).png


2(001).png


3.jpg


4(001).jpg


With a group of professional and experienced engineer team working for you and one of the most famous automotive wire harness for accelerator throttle pedal brands, KINKONG is one of the leading such manufacturers and suppliers in China. Welcome to wholesale customized automotive wire harness for accelerator throttle pedal made in China in stock with our factory. And free sample is also available.
Feedback