Automotive Wire Harness With 3 Pin Connector For Toyota

Product Details

How is it made? How is our quality control done? Do you test your harnesses?

We test every single engine harness we ship pin to pin to ensure full continuity and all proper crimps or splices in between. This of course confirms everything is going in the right place as well as getting the optimal voltage levels throughout. Two individuals visually inspect every single connector pinout separately so you don’t have mis-pinned connectors. We run through every connector and every heat shrink to ensure everything matches the specs you give us and that nothing is left behind un-shrunk or unfinished. Once everything checks out we walk it back to the talented individual who built it for what we call final shrinks. We leave main portions of the harness un-shrunk in case changes have to be made after quality control. From there it’s off to be shipped to you!


What is included? What sensors are eliminated or added?

For this specific engine harness, here is everything that is included as a standard as well as what we eliminate from the harness:


RETAINED

ALT – Alternator

CRANK - Crank Sensor

OIL-P - Oil Pressure Light

A/C - AC Compressor

INJ - Injectors 1 thru 6

COIL - Coil Packs 1 thru 6

TPS - Throttle Position Sensor

CAM-1 - Cam Sensor 1

CAM-2 - Cam Sensor 2

IAC - Idle Air Control Valve

RV - Reverse Light Switch

O2 - Oxygen Sensor

SEE SENSOR VARIANT LIST BELOW FOR OPTIONAL FUNCTIONS


ELIMINATED:

EVAP VSV

OIL-LEVEL (Retained on Supra chassis)

Progressive Power Steering (Retained on Supra chassis)

O2-2

TRAC ECU (Supra)


LETS SEE IT!

As we said before, everything matters. Success is in the details. We take great pride in the look and fitment of our products. The ECU and Chassis section (inside the car) is very thought out and perfectly organized, even when most cannot see this detail. Each adhesive heat shrink is the perfect measurement, the same length and overlap throughout. And lastly, on our CA2 and CA3 harnesses we’ll work with you directly to find the perfect engine to firewall mounting length.


Independent R & D capability for the complicated ECU. 


Customer-oriented Service: Furthermore, we have a professional service team to meet customer’s special requirement. Our staff ensure that all your products ordered will be manufactured and tested according to the standards of sampling products, and all your orders will be smoothly completed with satisfied quality. 

Our team’s strength and experience enables us to deliver high-quality diversified products with strict quality control, competitive prices and customer-oriented service. 

We have approved by: ISO/TS16949, ISO9001.

1(001).png


2(001).png


3.jpg


4(001).jpg


With a group of professional and experienced engineer team working for you and one of the most famous automotive wire harness with 3 pin connector for toyota brands, KINKONG is one of the leading such manufacturers and suppliers in China. Welcome to wholesale customized automotive wire harness with 3 pin connector for toyota made in China in stock with our factory. And free sample is also available.
Feedback