HONDA ACURA OBD2 PLUG TO SENSOR WIRE HARNESS ASSEMBLY

Product Details

How is it made? How is our quality control done? Do you test your harnesses?

Great care is given to every detail we pour into these products. The end result is a perfect fitting wiring harness with an artful high quality component design that is admired by car enthusiasts around the world. These harnesses altogether take 8 hours to 26 hours to make each depending on the version and application.


We test every single engine harness we ship pin to pin to ensure full continuity and all proper crimps or splices in between. This of course confirms everything is going in the right place as well as getting the optimal voltage levels throughout. Two individuals visually inspect every single connector pinout separately so you don’t have mis-pinned connectors. We run through every connector and every heat shrink to ensure everything matches the specs you give us and that nothing is left behind un-shrunk or unfinished. Once everything checks out we walk it back to the talented individual who built it for what we call final shrinks. We leave main portions of the harness un-shrunk in case changes have to be made after quality control. From there it’s off to be shipped to you!


What is included? What sensors are eliminated or added?

For this specific engine harness, here is everything that is included as a standard as well as what we eliminate from the harness:


RETAINED

CRANK - Crank Sensor

H20-T - Coolant Temp for Gauge

KNK-1 - Knock Sensor 1

A/C - AC Compressor

COIL - Coil Packs 1 thru 6

MAP - Manifold Absolute Pressure

CAM-1 - Cam Sensor 1

IAC - Idle Air Control Valve

STS - Starter Solenoid

VSS - Vehicle Speed Sensor

O2 - Oxygen Sensor


ELIMINATED:

EVAP VSV

OIL-LEVEL (Retained on Supra chassis)

O2-2

TRAC ECU (Supra)


LETS SEE IT!

As we said before, everything matters. Success is in the details. We take great pride in the look and fitment of our products. You won’t see anything on our products that doesn’t make sense and isn’t planned. The ECU and Chassis section (inside the car) is very thought out and perfectly organized, even when most cannot see this detail. Each adhesive heat shrink is the perfect measurement, the same length and overlap throughout. And lastly, on our CA2 and CA3 harnesses we’ll work with you directly to find the perfect engine to firewall mounting length.


We are an intelligent company, We have OA system, ERP system, PLM system…… , that can help us to management, control quality efficiently…


1(001).png


2(001).png


3.jpg


4(001).jpg


With a group of professional and experienced engineer team working for you and one of the most famous honda acura obd2 plug to sensor wire harness assembly brands, KINKONG is one of the leading such manufacturers and suppliers in China. Welcome to wholesale customized honda acura obd2 plug to sensor wire harness assembly made in China in stock with our factory. And free sample is also available.
Feedback